| Color |
Black-White |
| Thickness |
40-150micron |
The film can be applied to many kind of products for protection, to protect the surface from scratching or dust during the procesion or transportation or the installation.
They are easy apt and easy strip with no glue residu remain on the furface.
Usual specification:
Color: Clear, Blue, Black, Cream White, Black-White, Green, Yellow(we can produce any color that you required)
Thickness: 0.03mm-0.15mm
Width: Within 1.5m
Length: 100m-2000m
Adhesion: 6-1800g/50mm
Inner Packing: Air-cushioned film
Outer packing: Carton boxes
UV Protection: From one month to 6 months
Superiority
1). Dust-proof workshop
2). Stable adhesion capacity
3). Easy stick and tear off
4). Leaving no residue glue or trace on the target surfaces
5). Printability: able to print logo/text in 1~3colours on the surface of plastic protective film
6). Adhesion and base plate formula extractly match actual demand completely.
7). Produce pressure sensitive adhesive ourselves, has quality control and cost advantage.
8). Demand to add additiona uvioresistant resistance as available .
About qida
| 1). |
A professional Polyethylene film manufacturer |
| 2). |
Focus on PE protective film producing since 2008; |
| 3). |
Professional R&D Team; |
| 4). |
Professional technician team; |
| 5). |
Professional QC & QA Team; |
| 6). |
Offering OEM service; |
| 7). |
Offering 1~3 colors logo printing; |
| 8). |
Services for lots of well-known brands; |
| 9). |
Offering Free Samples in 5 spec for testing ; |
| 10). |
Pressure sensitive adhesive making by ourself. |
Special Remarks:
| Recommendation |
| 1). Keep away from aggressive gas. |
| 2).Best use them up within 12 months from the date of manufacture. |
| 3).Store at room temp to avoid insolation, high heat, and humidification. |
| 4).Avoid extrusion and bump during storage and transportation. |
| 5).Forbid hard objects direct impact or strongly pushed |
| 6).Forbid to transport or storage with organic solvents and other chemicals |
| 7).We suggest the using condition should be: |
| A). Temperature 15°C ~ 35°C |
| B).Humidity below 80%. |
| Beyond this condition, seller or distributor had better to make a internal testing before using! |
| 8).The application surface is damp or uncleanness, may affect the product viscosity. |
| If the application surface has oily, organic solvents and other chemicals that could easily leave residue. |
| 9).These information contained herein is typical values intended for reference and comparison purposes only. |
| They should not be used as a basis for design specifications or quality control. |
Audited Supplier 
){kind=link}